If you’re searching for a vacuum cleaner store Windsor Ontario residents can actually walk into, our showroom at 5428 Tecumseh Rd E is that store. This isn’t a satellite location or a drop-off counter — it’s home base. We’ve sold and repaired vacuums from this same spot on the Tecumseh Rd corridor since 2006, and everything on this page, from a new Aerus purchase to a same-week repair, happens right here in Windsor.
We’re an authorized Aerus dealer, which ties us back to Electrolux and a heritage that goes to 1924. That history matters less as a marketing line and more as a practical fact: these machines are built to be opened up, serviced, and kept running for years, and we have the parts and training to do exactly that for whatever you bring in.
Visit Our Tecumseh Rd E Showroom
Buying a vacuum sight unseen, based on a product photo and a star rating, is a bad way to spend money on something you’ll use every week. Our showroom lets you skip that guesswork. Come in and run a few models on carpet and hard flooring, compare a canister against an upright side by side, and ask about suction, weight, and noise before deciding on anything. We’ll walk through the attachments and filtration with you rather than pointing at a box and letting you figure it out at home. Windsor’s housing stock runs from older character homes near Walkerville with a mix of hardwood and area rugs to newer builds further out with wall-to-wall carpet, and the right vacuum for one isn’t always the right vacuum for the other. Seeing the machine work on flooring similar to yours settles that question faster than any spec sheet.
Aerus Vacuums and What’s In Stock
Our floor stock covers the Aerus lineup — upright, canister, and lightweight models — along with HEPA-filtered options for households dealing with allergies or fine dust. An Aerus vacuum Windsor customers buy from us gets set up and demonstrated before it leaves the showroom, not shrink-wrapped and handed over. If pet hair is the issue, we carry models with brush rolls and filtration built specifically to pull embedded hair out of carpet and upholstery, which matters a lot in a city with as many multi-pet households as this one has.
A HEPA vacuum Windsor allergy sufferers rely on only works if the filtration is actually sealed, not just labeled HEPA on the box. We check that seal on every unit we sell and again on units we repair, because a gap in the housing lets fine particulate right back into the room no matter how good the filter itself is.
Central Vacuum Installation
Central vacuum installation Windsor homeowners ask us about falls into two categories: retrofitting an existing house and wiring a new build before drywall goes up. Both are common here. Older homes around South Windsor and Forest Glade sometimes still have a central vacuum system installed decades ago that’s lost suction or has an inlet that stopped working, and we service those regardless of who installed them originally. For a new build, running the tubing during construction is far simpler than retrofitting later, and we work with homeowners and builders on the layout before walls close up.
Vacuum Repair, All Brands
Losing suction, a burning smell, or a new rattle usually points to a repair rather than a trip to buy a replacement. Our bench handles worn belts, clogged hoses, failing motors, and broken switches, and we work on all brands, not just Aerus. Bring in an old Kirby that’s been in a closet for years, a big-box upright, or a canister from a manufacturer that’s out of business now — there’s a good chance we can still get it running.
Because the showroom and repair bench are the same location, Windsor residents can drop off a vacuum and pick it up from the same counter without a second stop across town. That’s one advantage of being local rather than mailing a machine off to a regional service center and waiting weeks to hear back.
Motor Replacement
A motor that’s lost power or cuts out mid-clean is usually past a quick fix, but not always past repair. We check whether it’s actually the motor or something upstream, like a clogged filter starving it of airflow, before recommending vacuum motor replacement. On a higher-end machine, that’s often still cheaper than buying new.
Belt and Filter Replacement
The single most common reason a vacuum stops picking things up isn’t a dead motor — it’s a worn belt or a filter so clogged it’s choking airflow. These are quick bench jobs, and because we keep belts and filters in stock for most major brands, a same-visit fix is often possible instead of an order-and-wait.
Vacuum Tune-Up
A tune-up covers the brush roll, hose, seals, and motor condition together, which catches small problems before they turn into a dead machine. If a vacuum you’ve owned for years feels weaker than it used to, a tune-up is worth doing before deciding it’s done for good.
Parts Always In Stock
Bags, belts, filters, and attachments sit on our shelves for the brands we sell and several others. If you’re not sure which vacuum parts fit your machine, bring the unit in or a clear photo of the model number and we’ll match it up rather than sending you home to guess at a part number online.
Serving Windsor and Beyond
Windsor is where the showroom sits, but it’s not the only place we serve. Homeowners across the Tecumseh Rd corridor, Walkerville, South Windsor, and Forest Glade come through regularly for sales, repair drop-off, and central vacuum service, and we handle the rest of the county too. For a full picture of how our vacuum sales and repair work reaches the surrounding towns, our vacuum cleaner sales and repair hub for Essex County covers Tecumseh, LaSalle, Essex, Amherstburg, Kingsville, and Leamington alongside Windsor.
Frequently Asked Questions
Do I need an appointment to visit the showroom?
No. Walk-ins are welcome during business hours if you want to look at machines, ask questions, or drop off a repair. If you’d rather guarantee someone’s free to walk through options with you in detail, calling ahead at 519-944-7800 is a good idea, but it isn’t required.
Do you repair vacuums that aren’t Aerus?
Yes. We service Aerus and Electrolux machines with genuine parts and factory specs, and our bench also repairs most other major brands, including older models that aren’t manufactured anymore.
Can you install a central vacuum in an existing home, not just new construction?
Yes. Retrofitting an existing home takes more planning than wiring a new build, since we have to route tubing through walls, floors, or a basement rather than before drywall goes up, but it’s a job we handle regularly for homes throughout Windsor.
Visit our showroom at 5428 Tecumseh Rd E or call 519-944-7800 to ask about a specific vacuum, book a repair, or schedule a central vacuum estimate. For more answers about our services across the region, see our FAQ page.